To Next PageTo Next PageWhy does mist emerge from the indoor unit of my Panasonic Air Conditioner?
The mist emerging from the indoor unit of your Panasonic Air Conditioner is a condensation effect caused by the cooling process.
What causes the water flowing sound during operation of my Panasonic Air Conditioner?
The water flowing sound you hear during the operation of your Panasonic Air Conditioner is due to the flow of refrigerant inside the unit.
Why does the outdoor unit of my Panasonic Air Conditioner emit water or steam?
The outdoor unit of your Panasonic Air Conditioner emits water or steam because condensation or evaporation occurs on the pipes.
Why does the POWER indicator blink on my Panasonic CS-E12QD3RW Air Conditioner before turning it on?
The POWER indicator might blink before you switch on your Panasonic Air Conditioner because the unit is preparing for operation when the ON timer has been set.
What does it mean when the POWER indicator blinks and the indoor fan stops on my Panasonic Air Conditioner?
The POWER indicator blinking during operation with the indoor fan stopped indicates that your Panasonic Air Conditioner is in defrost mode. During this process, melted frost is being drained from the outdoor unit.
Why does my Panasonic Air Conditioner make a cracking sound during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is due to the expansion and contraction of the unit caused by temperature changes.
Why is the POWER indicator blinking before my Panasonic CS-E12QD3RW is switched on?
The blinking POWER indicator before the Panasonic Air Conditioner is switched on indicates a preliminary step in preparation for operation when the ON timer has been set.
Why is the operation delayed after restarting my Panasonic CS-E12QD3RW?
The operation of your Panasonic Air Conditioner might be delayed for a few minutes after restarting as a protection mechanism for the unit’s compressor.
What to do if my Panasonic Air Conditioner does not receive the signal from the remote control?
If the Panasonic Air Conditioner unit is not receiving the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer for assistance.
Why does my Panasonic Air Conditioner remote control not work?
If your Panasonic Air Conditioner remote control isn't working, first, ensure the batteries are inserted correctly. If that doesn't solve the issue, try replacing the batteries with new ones.
General| Brand | Panasonic |
|---|---|
| Model | CS-E12QD3RW |
| Category | Air Conditioner |
| Language | English |
