To Next PageTo Next PageWhat does H14 mean on my Panasonic CS-E24NKUA?
The H14 error in your Panasonic Air Conditioner indicates an abnormality with the indoor intake air temperature sensor. Possible causes are a faulty connector connection, a faulty sensor, or a faulty PCB.
Why is my Panasonic Air Conditioner showing F97 (Compressor Overheating)?
The F97 error on your Panasonic Air Conditioner indicates compressor overheating, which may be due to refrigerant shortage (refrigerant leakage), a closed 2/3 way valve, or a faulty compressor tank temperature sensor.
What causes the F98 error on a Panasonic Air Conditioner?
The F98 error in your Panasonic Air Conditioner indicates an input over current detection. This can be caused by compressor failure, a defective outdoor unit PCB, a defective inverter main circuit electrolytic capacitor, or excessive refrigerant.
What does H99 error mean on my Panasonic CS-E24NKUA?
The H99 error in your Panasonic Air Conditioner indicates indoor freeze prevention protection during cooling or soft dry modes. This can be due to a clogged air filter, dust accumulation on the indoor unit heat exchanger, an air short circuit, a faulty indoor pipe temperature sensor, or a faulty indoor unit PCB.
What does F95 error mean on a Panasonic Air Conditioner?
The F95 error in your Panasonic Air Conditioner indicates a cooling high pressure abnormality. This could be due to a rise in outdoor pipe temperature caused by a short circuit of hot discharge air flow, a defective outdoor fan motor, a defective outdoor pipe temperature sensor, or a defective outdoor unit PCB.
What does H98 error mean on my Panasonic CS-E24NKUA Air Conditioner?
The H98 error in your Panasonic Air Conditioner indicates indoor high pressure protection. This can be caused by a clogged air filter, dust accumulation on the indoor unit heat exchanger, an air short circuit, a faulty indoor pipe temperature sensor, or a faulty indoor unit PCB.
What does H16 error mean on my Panasonic CS-E24NKUA?
The H16 error in your Panasonic Air Conditioner indicates an open circuit in the outdoor current transformer. This could be due to a defective CT, a defective outdoor PCB, or a defective compressor (low compression).
What does H23 error mean on my Panasonic CS-E24NKUA?
The H23 error in your Panasonic Air Conditioner indicates an abnormality with the indoor pipe temperature sensor. This can be caused by a faulty connector connection, a faulty sensor, or a faulty PCB.
What does error code F11 mean on my Panasonic Air Conditioner?
The F11 error in your Panasonic Air Conditioner indicates an abnormality with the indoor pipe temperature sensor. This could be due to a faulty connector connection, a faulty indoor pipe temperature sensor, or a faulty indoor main PCB.
What does F96 (IPM Overheating) mean on my Panasonic CS-E24NKUA Air Conditioner?
The error F96 in your Panasonic Air Conditioner indicates IPM overheating, which can be caused by a short circuit of hot discharge air flow, a defective outdoor fan motor, a defect in the internal circuitry of the IPM, or a defective IPM temperature sensor.
General| Brand | Panasonic |
|---|---|
| Model | CS-E24NKUA |
| Category | Air Conditioner |
| Language | English |
Warnings and precautions for handling and operating the indoor and outdoor units.
Safety guidelines for using the remote control and its batteries.
Safety measures related to power cords, wiring, and electrical connections.
Cautions regarding cleaning, installation, and operation environment of the units.
Details power supply requirements, circuit breaker ratings, and voltage for different models.
Instructions on how to power the air conditioner unit on and off using the remote.
Guide to adjusting the desired temperature for heating or cooling.
Explains how to choose between AUTO, HEAT, COOL, and DRY modes.
Details the five fan speed options available for the air conditioner.
Instructions for controlling the horizontal and vertical airflow direction.
How to activate the quiet mode for reduced airflow noise.
Operation that stops automatically after 20 minutes for rapid temperature adjustment.
How to dim or restore the unit's indicator brightness.
How to switch between Celsius (°C) and Fahrenheit (°F) for temperature display.
How to switch between 12-hour (am/pm) and 24-hour time format.
Procedure to reset the remote control to its original default settings.
Instructions for setting the unit to turn on or off at a preset time daily.
Guidelines for cleaning the indoor unit, including recommended cleaning agents and methods.
Steps for safely removing, cleaning, and reattaching the front panel.
Information about the location and function of the remote control receiver.
Note not to adjust horizontal and vertical airflow louvers by hand.
How to use the unit's auto off/on button when the remote is lost or malfunctioning.
Instructions for vacuuming, cleaning, and replacing the air purifying filter.
Procedure for cleaning air filters regularly and replacing damaged ones.
Common symptoms that do not signify a fault in the air conditioner's operation.
Steps to check before contacting a service technician for issues like inefficient operation or remote problems.
Procedure to retrieve error codes using the remote control when the unit stops and the timer blinks.
Guidelines for inspecting the unit after extended periods of non-use and during seasonal storage.
Conditions under which to switch off power and consult an authorized dealer.
Information on collection and disposal of old equipment and batteries, especially for the European Union.
Statements regarding compliance with Federal Communications Commission and Industry Canada regulations.
Step-by-step instructions for inserting batteries into the remote control.
Guide on setting the clock and time on the remote control for accurate timer functions.
Overview of the primary buttons for mode selection, power, and temperature adjustment.
