To Next PageTo Next PageWhat does H33 error mean on my Panasonic Air Conditioner?
The H33 error in your Panasonic Air Conditioner indicates an unspecified voltage between the indoor and outdoor units. This could be due to wrong models being interconnected, wrong indoor and outdoor unit PCBs being used, or a defective indoor or outdoor unit PCB.
What does error code F11 mean on my Panasonic Air Conditioner?
The F11 error in your Panasonic Air Conditioner indicates an abnormality with the indoor pipe temperature sensor. This could be due to a faulty connector connection, a faulty indoor pipe temperature sensor, or a faulty indoor main PCB.
What does H14 mean on my Panasonic CS-E24NKUA?
The H14 error in your Panasonic Air Conditioner indicates an abnormality with the indoor intake air temperature sensor. Possible causes are a faulty connector connection, a faulty sensor, or a faulty PCB.
What does H23 error mean on my Panasonic CS-E24NKUA?
The H23 error in your Panasonic Air Conditioner indicates an abnormality with the indoor pipe temperature sensor. This can be caused by a faulty connector connection, a faulty sensor, or a faulty PCB.
What does F93 error mean on my Panasonic Air Conditioner?
The F93 error in your Panasonic Air Conditioner indicates a compressor rotation failure. This can be caused by a compressor terminal disconnect or an outdoor PCB malfunction.
What does H16 error mean on my Panasonic CS-E24NKUA?
The H16 error in your Panasonic Air Conditioner indicates an open circuit in the outdoor current transformer. This could be due to a defective CT, a defective outdoor PCB, or a defective compressor (low compression).
General| Brand | Panasonic |
|---|---|
| Model | CS-E24NKUA |
| Category | Air Conditioner |
| Language | English |
Warnings and precautions for handling and operating the indoor and outdoor units.
Safety guidelines for using the remote control and its batteries.
Safety measures related to power cords, wiring, and electrical connections.
Cautions regarding cleaning, installation, and operation environment of the units.
Details power supply requirements, circuit breaker ratings, and voltage for different models.
Instructions on how to power the air conditioner unit on and off using the remote.
Guide to adjusting the desired temperature for heating or cooling.
Explains how to choose between AUTO, HEAT, COOL, and DRY modes.
Details the five fan speed options available for the air conditioner.
Instructions for controlling the horizontal and vertical airflow direction.
How to activate the quiet mode for reduced airflow noise.
Operation that stops automatically after 20 minutes for rapid temperature adjustment.
How to dim or restore the unit's indicator brightness.
How to switch between Celsius (°C) and Fahrenheit (°F) for temperature display.
How to switch between 12-hour (am/pm) and 24-hour time format.
Procedure to reset the remote control to its original default settings.
Instructions for setting the unit to turn on or off at a preset time daily.
Guidelines for cleaning the indoor unit, including recommended cleaning agents and methods.
Steps for safely removing, cleaning, and reattaching the front panel.
Information about the location and function of the remote control receiver.
Note not to adjust horizontal and vertical airflow louvers by hand.
How to use the unit's auto off/on button when the remote is lost or malfunctioning.
Instructions for vacuuming, cleaning, and replacing the air purifying filter.
Procedure for cleaning air filters regularly and replacing damaged ones.
Common symptoms that do not signify a fault in the air conditioner's operation.
Steps to check before contacting a service technician for issues like inefficient operation or remote problems.
Procedure to retrieve error codes using the remote control when the unit stops and the timer blinks.
Guidelines for inspecting the unit after extended periods of non-use and during seasonal storage.
Conditions under which to switch off power and consult an authorized dealer.
Information on collection and disposal of old equipment and batteries, especially for the European Union.
Statements regarding compliance with Federal Communications Commission and Industry Canada regulations.
Step-by-step instructions for inserting batteries into the remote control.
Guide on setting the clock and time on the remote control for accurate timer functions.
Overview of the primary buttons for mode selection, power, and temperature adjustment.
