To Next PageTo Next Page
Need help?Do you have a question about the Panasonic CS-E28NKR and is the answer not in the manual?
General| Cooling Capacity | 2.8 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Weight (Indoor Unit) | 8 kg |
| Refrigerant | R410A |
| Type | Split System |
| Noise Level (Outdoor) | 48 dB |
General safety warnings for the indoor and outdoor units.
Safety precautions for operating the remote control.
Safety guidelines and instructions for the power supply.
Specific cautions related to the power supply to prevent hazards.
Cautions for indoor and outdoor units to prevent damage or injury.
Additional cautions for the safe use and maintenance of the remote control.
Explanation of the buttons and their functions on the remote control.
Details on selecting operation modes like AUTO, HEAT, COOL, and DRY.
Instructions for selecting fan speed and adjusting airflow direction.
How to use the nanoe-G function for air purification.
Using the unit to improve humidity and moisture levels.
Switching between Powerful and Quiet operation modes.
Using the ECONAVI sensor for energy saving and comfort.
Procedures for setting the ON and OFF timers for the air conditioner.
Important notes regarding timer operation and cancellation.
Guidelines for cleaning the indoor unit and its components.
Identification and care for parts like the front panel, fins, and sensors.
Instructions for cleaning and maintaining the air filters.
Recommended cleaning procedure for the nanoe-G generator.
Symptoms that do not indicate a malfunction and their causes.
Steps to check before calling for servicing when issues arise.
How to retrieve error codes using the remote control for diagnosis.
Recommended checks after periods of extended non-use.
Steps to take for extended periods of non-operation.
Conditions requiring consultation with an authorized dealer.
Guidance on disposal of old equipment and batteries.
Steps for inserting batteries into the remote control.
Procedure for setting the clock and current time.
