Panasonic CS-E9DKDW User Manual

2.2. Indoor Unit
Automatic Operation Switch
• Press for < 5s to run Automatic Operation.
(Used when the remote control cannot be used.)
• Press continuously for 5s and < 8s to run
Forced Cooling Operation.
• Press continuously for 8s and < 11s to
run Forced Heating Operation.
• Press continuously for 11s and < 16s to
change different remote controlling
setting (A↔B Mode).
• Press continuously for 16s or < 21s to
switch OFF / ON Remote Control
Receiving Sound or H14 Abnormality
Detection Mode.
Operation Indication Lamps (LED)
Quiet Mode
Four Operation Modes
• Automatic, Heating, Cooling and Soft Dry
Operation.
Delay ON Timer and OFF Timer
Powerful Mode
• For quick cooling or heating.
•
POWER (Green) ........ Lights up in
operation, blinks in
Automatic Operation
Mode judging and
Hot Start operation.
•
TIMER (Orange) ...... Lights up in Timer
Setting.
Blinks in Self
Diagnosis Control.
•
QUIET (Orange) ...... Lights up in Quiet
Mode Operation.
•
POWERFUL (Orange) ..... Lights up when
Powerful Mode is
selected.
•
(Green) .............. Lights up in Ionizer
Mode Operation.
• SUPER
ALLERU-BUSTER
(Blue) ... Lights up in
operation.
Automatic and 5 Manual Indoor
Fan Speeds
Automatic and 5 Manual Vertical
Airflow Directions
Automatic and 5 Manual Horizontal
Airflow Directions
Automatic Restart Control
• Operation is restarted after power failure
at previous setting mode.
Microcomputer-controlled Room
Temperature Control
• To provide quiet operation.
Ionizer Control
• Ionizer control for generate negative ion
in discharge air.
4
CS-E9DKDW CU-E9DKD / CS-E12DKDW CU-E12DKD

Panasonic CS-E9DKDW Specifications

General

Brand	Panasonic
Model	CS-E9DKDW
Category	Air Conditioner
Language	English