To Next PageTo Next PageWhy is my Panasonic Air Conditioner showing an indoor/outdoor unit disconnection problem?
The issue might stem from a disconnection between the indoor and outdoor units, which can be caused by problems with the connection cable and terminals. Check the power supplies on both the indoor and outdoor units. Alternatively, there could be a general connection error between the units.
How to fix a system problem on my Panasonic CS-F50DTE5 (F30 error)?
The system problem could arise from an insufficient total capacity for the number of indoor units. To resolve this, verify the total capacity against the number of indoor units. Also, check for an open or reversed phase in the power supply. Inspect the main power supply terminal board connections, and if necessary, switch over any two of the power supply wires.
What causes the F20 error on my Panasonic CS-F50DTE5 Air Conditioner?
The error indicates a problem with the indoor temperature sensor. Check the indoor temperature sensor lead wire, the indoor unit connector, or CN-TH2. It could also be a remote control thermistor problem.
What does inverter protection (Low DC voltage) mean for my Panasonic CS-F50DTE5?
This could be due to a low DC voltage, in which case you should check the power supply. Alternatively, it might be an IPM (Intelligent Power Module) protection issue, indicating an IPM fault or a problem with the main PCB (Printed Circuit Board).
General| Indoor unit type | Ceiling |
|---|---|
| Indoor unit weight | 47000 g |
| Indoor units quantity | 1 |
| Indoor unit dimensions (WxDxH) | 1600 x 700 x 250 mm |
| Indoor unit noise level (high speed) | 50 dB |
| Outdoor unit weight | 105000 g |
| Outdoor unit noise level | 56 dB |
| Outdoor unit dimensions (WxDxH) | 900 x 320 x 1340 mm |
| Hose length (max) | 50 m |
| Inverter technology | Yes |
| Refrigerating medium | R410A |
| Cooling capacity (max) | 47700 BTU/h |
| Heating capacity (max) | 54600 BTU/h |
| Air conditioner functions | Cooling, Heating |
| Cooling capacity in watts (max) | 14000 W |
| Heating capacity in watts (max) | 16000 W |
| Cooling energy efficiency (EER, W/W) | 2.91 |
| Heating energy efficiency (COP, W/W) | 3.41 |
Safety advice and precautions for using the wireless remote control.
Essential safety guidelines related to the unit's power supply.
Important safety warnings and prohibitions for the indoor unit.
Safety precautions and warnings specific to the outdoor unit.
Specifies the indoor and outdoor temperature ranges for unit operation.
Guidance on proper disposal of used electrical products and batteries.
Overview and identification of components on the wireless remote control.
Instructions for inserting batteries and preparing the remote control.
How to turn the unit on/off, set temperature, and select operation modes.
Instructions for fan speed, airflow direction, economy mode, and odour removal.
Overview and identification of components on the wired remote control.
Instructions for setting the day and time on the wired remote control.
How to turn the unit on/off, set temperature, and select operation modes.
Instructions for fan speed, airflow direction, economy mode, and odour removal.
Explains functionality, daily vs. weekly timer, and timer program limits.
How to check, modify, add, or cancel timer programs.
Instructions to disable or enable previously set weekly timer programs.
Guidelines for washing the unit and maintenance tips.
Step-by-step guide for removing and installing air filters.
Recommendations for cleaning air filters and resetting the indicator.
Symptoms that do not indicate a malfunction but are normal operations.
Checks to perform before calling for servicing or professional help.
Interpreting and responding to the 'CHECK' indicator on the wired remote.
Steps for seasonal inspection and preparing for extended non-use.
Conditions requiring immediate power off and professional service.
