What to do when Panasonic CS-FZ25UKE units are not going to be used for a long period of time?
If your Panasonic Air Conditioner units are not going to be used for a long period of time: 1. Activate HEAT mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. 2. Turn off the power supply and unplug. 3. Remove the remote control batteries.
How to dim the indicators on my Panasonic Air Conditioner?
If your Panasonic Air Conditioner's indicators are too bright, press and hold the button for 5 seconds to dim or restore the unit’s indicator brightness.
Why is my Panasonic CS-FZ25UKE Air Conditioner HEAT/COOL mode not working efficiently?
If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, ensure the temperature is set correctly, all doors and windows are closed, the filters are clean or replaced, and there are no obstructions at the air inlet and outlet vents.
What to do if my Panasonic CS-FZ25UKE unit does not work?
If your Panasonic Air Conditioner unit isn't working, verify that the circuit breaker hasn't tripped. Also, check to see if any timers have been set.
Why does the POWER indicator blink during HEAT mode with no warm air supply in my Panasonic Air Conditioner?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode and there is no warm air supply (with the flap closed), the unit is in defrost mode and AIR SWING is set to AUTO.
Why are some plastic parts of my Panasonic CS-FZ25UKE Air Conditioner discolored?
Discoloration of some plastic parts in your Panasonic Air Conditioner is subject to the material types used and is accelerated when exposed to heat, sunlight, UV light, or environmental factors.
Why do I hear a water flowing sound during Panasonic CS-FZ25UKE Air Conditioner operation?
If you hear a water flowing sound during the operation of your Panasonic Air Conditioner, it is due to refrigerant flow inside the unit.
Why does mist emerge from the indoor unit of my Panasonic CS-FZ25UKE Air Conditioner?
If you see mist emerging from the indoor unit of your Panasonic Air Conditioner, it's a condensation effect due to the cooling process.
What to do if the remote control for my Panasonic CS-FZ25UKE is missing?
If the remote control for your Panasonic Air Conditioner is missing or malfunctioning, you can raise the front panel, then: 1. Press the button once to use in AUTO mode. 2. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. 3. Repeat step 2. Press and hold the button until you hear 2 beeps, then release to use in forced HEAT mode. 4. Press the button again to turn off.
Why is operation delayed after restarting my Panasonic Air Conditioner?
If your Panasonic Air Conditioner operation is delayed a few minutes after restarting, this delay protects the unit’s compressor.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Energy Efficiency Class | A++ |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 8 kg |
| Noise Level (Outdoor) | 48 dB(A) |
| Type | Split |
| Noise Level (Indoor) | 20 dB(A) |
To Next Page