To Next PageTo Next PageWhy does the POWER indicator blink on my Panasonic CS-LE9SKA Air Conditioner before it turns on?
The POWER indicator blinking on your Panasonic Air Conditioner before the unit is switched on is a preliminary step in preparation for operation when the ON timer has been set.
Why does airflow continue after I stop my Panasonic CS-LE9SKA Air Conditioner?
The airflow in your Panasonic Air Conditioner continues even after operation has stopped because the unit is extracting remaining heat from the indoor unit, which can take up to 30 seconds.
Why is there a water splashing sound at the outdoor Panasonic Air Conditioner unit during operation?
The water splashing sound at the outdoor unit of your Panasonic Air Conditioner during operation occurs because the drainage method is optimized for maximum performance. Please consult an authorized dealer to alter the method.
Why does mist emerge from my Panasonic CS-LE9SKA indoor unit?
Mist emerging from the indoor unit of your Panasonic Air Conditioner is a condensation effect due to the cooling process.
Why does the indoor fan stop sometimes on my Panasonic CS-LE9SKA Air Conditioner?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to help remove surrounding odors.
Why does my Panasonic Air Conditioner's indoor fan stop during heating?
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to avoid unintended cooling effect.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Indoor Unit Noise Level | 19 dB (Low) |
| Outdoor Unit Noise Level | 48 dB(A) |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor) | 19 dB (Low) |
| Noise Level (Outdoor) | 48 dB |
Step-by-step instructions for installing batteries into the remote control.
Overview of selecting modes, starting/stopping, and setting temperature.
Warnings and prohibitions for indoor and outdoor units, including handling and installation.
Safety guidelines for remote control usage and power supply connections to prevent hazards.
Explains the nanoe-G function for purifying air and deactivating viruses/bacteria.
Details on AUTO, HEAT, COOL, and DRY modes for optimal operation.
How to use the SLEEP mode for comfortable nighttime operation and its settings.
How to clean the main indoor unit body and its front panel.
Instructions for cleaning air filters and the nanoe-G generator unit.
Lists common operating symptoms and their potential causes, not indicating malfunction.
Steps to check before calling for servicing for operational issues.
Procedure to retrieve error codes when the unit stops or indicates an error.
Guidelines for the collection and disposal of old equipment and used batteries.
