17
English
See "To Learn More..." for details.
• To cancel the timer, press
or to
select the respective setting
or , then
press
.
• If the timer has been cancelled manually or
due to power failure, you can restore the
timer again. Press
or to select
the respective setting
or , then press
.
• The nearest timer setting is displayed and
will activate in sequence.
• The timer operation follows the clock
setting on the remote control and will
repeat daily when timer has been set. For
clock setting, refer to Quick Guide.
You can set the timer to turn on and off the unit at 2 different preset time.
3
1 2
Select TIMER ON
or TIMER OFF.
Example:
OFF at 22:00
• Each time pressed:
(exit setting)
Set the time.
Confi rm the setting.
1
2
3
Note
, ,
,
• Can be selected at the same time.
• Can be activated in all modes.
• Press the button again to cancel.
• Cannot be selected at the same time.
• This operation provides you with a comfortable environment while sleeping. It will
automatically adjust the sleep pattern temperature during the activation period.
• The indoor unit indicator will dim when this operation is activated. This is not applicable if
the indicator brightness has been manually dimmed.
• This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer. Sleep operation has the priority over OFF
timer.
• This operation can be cancelled by pressing the respective button until the sleep timer
reaches 0.0h.
• For Wireless LAN Module operation setup, please refer to Setup Instructions
Manual.
How to Use
To maximise comfort while sleeping
To set the timer
To connect to a network
To Next Page
Loading...
Need help?
General
