To Next PageTo Next PageWhat to do if the motor rotates briefly then stops on my Panasonic CS-MKE9NKU Air Conditioner?
If the motor rotates for a few seconds and then quickly stops when the indoor unit of your Panasonic Air Conditioner is operating, first replace the indoor unit controller, then, if necessary, replace the DC motor.
Why does the indoor fan motor not rotate on my Panasonic CS-MKE9NKU Air Conditioner?
If the indoor fan motor does not rotate when your Panasonic Air Conditioner unit is operating, it indicates indoor unit controller trouble. Replace the controller.
How to troubleshoot self-diagnostics failure on Panasonic Air Conditioner?
To troubleshoot a self-diagnostics failure on your Panasonic Air Conditioner: * Check the indoor unit. * Check the power voltage. * Check if the fuse is blown. * Replace the circuit board or the fuse.
Why does the fan not stop on my Panasonic CS-MKE9NKU?
If the fan in your Panasonic Air Conditioner does not stop when the unit stops, it indicates indoor unit controller trouble. Replace the controller.
What to do if the fan motor rotation speed varies excessively during indoor unit operation of my Panasonic CS-MKE9NKU?
If the fan motor rotation speed varies excessively during indoor unit operation of your Panasonic Air Conditioner, first replace the indoor unit controller, then, if necessary, replace the DC motor.
What to do if the fan motor rotation speed does not change during indoor unit operation of my Panasonic CS-MKE9NKU?
If the fan motor rotation speed does not change during indoor unit operation of your Panasonic Air Conditioner, first replace the indoor unit controller, then, if necessary, replace the DC motor.
General| Brand | Panasonic |
|---|---|
| Model | CS-MKE9NKU |
| Category | Air Conditioner |
| Language | English |
Details critical safety warnings and cautions for service personnel.
Table showing which indoor units are compatible with specific multi-outdoor units.
Specifies the acceptable indoor and outdoor temperature ranges for cooling and heating.
Detailed technical specs for indoor units, including electrical and performance data.
Specs for key internal components like PCB, fan, motors, and coils.
Specifications for sensors used in the air conditioning system.
Provides physical dimensions for indoor units CS-MKE7NKU, CS-MKE9NKU, CS-MKE12NKU.
Illustrates refrigerant flow paths for cooling/heating cycles for various indoor units.
Charts showing air throw distance based on flap angle and fan speed for cooling/heating.
Provides wiring diagrams for indoor units, showing connections for various components.
Describes functions like Emergency operation, Sensor Dry, Auto Initial Mode, and PAM-α control.
Details overload, freeze, and cold-air prevention mechanisms during operation.
Safety precautions and important notes before starting inspection or repair work.
Procedure to initiate and interpret the unit's self-diagnostics mode for error detection.
Steps for checking the operation and status of indoor and outdoor units.
Diagnosing issues related to the indoor fan motor, including voltage checks.
Addresses causes and solutions for noise malfunctions and electromagnetic interference.
