Panasonic CS-PC9QKH

6
How to use
To adjust horizontal airfl ow direction
• Manually adjustable.
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in iAUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then release.
• Press the button again to turn
off.
FAN SPEED
MODE
TEMP
OFF/ON
TIMER
SET
CANCEL
ON
OFF
1
2
3
OFF
TIMER
ON
TIMER
iAUTO
COOL
DRY
FAN
SPEED
AIR
SWING
SET CLOCK RESET
AIR SWING
iAUTO
TEMP
OFF/ON
TIMER
S
ET
C
AN
C
E
L
ON
O
FF
1
3
CL
O
C
K
Remote control display
Press to restore the
remote control to
default setting.
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Not used in normal
operations.
Remote control receiver
and indicator
POWER
(Green)
TIMER
(Orange)
iAUTO
To reach temperature quickly
• The unit controls set temperature according to
room temperature to accelerate room cooling.
Set
temperature
iAUTO
-1°C
Max = 4 hours
• Fan speed is fi xed at AUTO, fan speed selection
is prohibited.
• During unit is off, press
iAUTO
will turn on the unit
with iAUTO mode.
• iAUTO mode can be cancelled by pressing the
respective button again.
MODE
To select operation mode
iAUTO mode - To reach temperature quickly
• An alternative method to turn on iAUTO mode.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
F569438_YA0713-0.indb 6F569438_YA0713-0.indb 6 10/21/2013 4:35:17 PM10/21/2013 4:35:17 PM