13
English
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If iAUTO mode is set, fan speed is fixed to AUTO.
To adjust fan speed, cancel iAUTO mode.
AIR SWING
To adjust vertical air flow
direction
(Remote control display)
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver
swings up/down automatically.
• Do not adjust the louver by hand.
Operation conditions
Use this air conditioner under the following temperature range.
DBT : Dry bulb temperature
WBT : Wet bulb temperature
Temperature (°C)
Indoor Outdoor
DBT WBT DBT WBT
COOL
Max. 32 23 43 26
Min. 16 11 16 11
To set the timer
To turn ON or OFF the unit at a preset time.
TIMER
SET
CANCEL
ON
OFF
1
2
3
21 3
1
Select ON or OFF
timer
Example:
OFF at 22:00
OFF
OFF
TIMER
2
Set the time
2
OFF
TIMER
3
Confirm (SET)
SET
OFF
TIMER
TIMER
• To cancel ON or OFF timer, press
ON
or
OFF
then press
CANCEL
.
• When ON Timer is set, the unit may start
earlier (up to 15 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
• If timer is cancelled manually or due to power
failure, you can restore the previous setting
(once power is resumed) by pressing
SET
.
How to use
ECO
SMART
To select operation ECO SMART
• Setting temperature is automatically increase
up to 3°C within 4 hours.
• Fan speed is automatically adjusted.
F569558 9/26/2013 9:27:34 AM
i
To Next Page
Loading...
