Panasonic CS-PU9AKH-8

15
See "To Learn More..." for details.
How to Use
Note
SLEEP
,
POWERFUL/
ECO
,
FAN SPEED/
QUIET
,
POWERFUL/
ECO
• Can be selected at the same time.
• Can be activated in all modes.
• POWERFUL, QUIET and FAN SPEED
cannot be selected at the same time.
• This operation provides you with a comfortable environment while sleeping. It will automatically adjust
the sleep pattern temperature during the activation period.
• The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator
brightness has been manually dimmed.
• This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer. Sleep operation has the priority over OFF timer.
• This operation can be cancelled by pressing the respective button until the sleep timer reaches 0.0h.
To maximise comfort while sleeping
SLEEP
• nanoe™-G starts automatically when the unit is turned on with
OFF/ON
OFF/ON
.
• nanoe™-G operation provides clean air by producing great amount of negative ions and distribute
through the discharge airfl ow to capture or deactivate molds, bacteria or viruses.
• This operation can be turned ON or OFF manually by pressing .
• This operation can be activated even when the unit is turned off. In this condition, the fl ap and fan
speed will operate based on remote control setting.
• If power failure occurs during this operation, this operation will be resumes immediately after power
resumes.
To enjoy fresher and cleaner environment
To set the timer
ON
OFF
SET
TIMER
CANCEL
1 2 3
1
Select TIMER ON or
TIMER OFF.
Example:
OFF at 22:00
• Each time pressed:
OFF
(exit setting)
2
Set the time.
3
Confi rm the setting.
SET
• To cancel the timer, press
ON
or
OFF
to select
the respective setting or , then press
CANCEL
.
• If the timer has been cancelled manually or due
to power failure, you can restore the timer again.
Press
ON
or
OFF
to select the respective
setting or , then press
SET
.
• The nearest timer setting is displayed and will
activate in sequence.
• The timer operation follows the clock setting on
the remote control and will repeat daily when
timer has been set. For clock setting, refer to
Quick Guide.
You can set the timer to turn on and off the unit at 2 different preset time.
English