Unit CS-PW18CKE CU-PW18CKE
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Pre Coat)
Fin Type Slit Fin Corrugated Fin
Row / Stage (Plate fin configuration, forced draft)
2×15 2×20
FPI 21 17
Size (W × H × L) mm 810 × 315 × 25.4 692.3
728.7
× 508 × 44
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (cm
3
) — RB68A OR FRE0L ALPHA 68M
(670)
Refrigerant (R410A) g (oz) — 1,330 (47.0)
Thermostat Electronic Control Electronic Control
Protection Device — Inner Protector
Capillary Tube Length mm — Cooling; 1,180, Heating; 1,048
Flow Rate l/min — Cooling; 8.7, Heating; 14.0
Inner Diameter mm — Cooling; 1.5, Heating; 1.8
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 50 µF, 370VAC
Fan Motor Capacitor µF, VAC — 2.0 µF, 440VAC
Note:
•
• •
•
Specifications are subject to change without notice for further improvement.
7
CS-PW18CKE CU-PW18CKE
To Next Page
Loading...
Need help?
General
