To Next PageTo Next PageWhy is my Panasonic CS-S12PKV not cooling efficiently?
If your Panasonic Air Conditioner's COOL mode isn't working efficiently, make sure to set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
What to do if the Panasonic CS-S12PKV remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, ensure the batteries are inserted correctly and replace weak batteries.
What to do if Panasonic Air Conditioner unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the transmitter is not obstructed. Certain fluorescent lights may also interfere with the signal.
How to fix a noisy Panasonic CS-S12PKV Air Conditioner?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline. Also, make sure the front panel is closed properly.
What to do if my Panasonic CS-S12PKV shows error code F95?
If your Panasonic Air Conditioner displays error code F95, it indicates a cooling high pressure protection issue. This is caused by a problem in the outdoor refrigerant circuit. To resolve this, inspect and repair the outdoor refrigerant circuit.
What to do if my Panasonic CS-S12PKV displays error code F91?
If your Panasonic Air Conditioner displays error code F91, it indicates a refrigeration cycle abnormality, usually caused by refrigerant shortage due to a leak. You should check for refrigerant leaks and recharge the system if necessary.
Why does my Panasonic CS-S12PKV Air Conditioner show error code H98?
If your Panasonic Air Conditioner shows error code H98, it means there's an indoor temperature rise abnormality. This is often due to a dirty air filter. To fix it, clean or replace the air filter.
What does error code H99 mean on my Panasonic CS-S12PKV?
If your Panasonic Air Conditioner displays error code H99, it indicates indoor heat exchanger freeze prevention protection. This is usually due to insufficient refrigerant. Check for refrigerant leaks and recharge the system if necessary.
What does error code F98 mean on a Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays error code F98, it means there is an input over current detection, caused by over-current due to compressor failure. To resolve this, inspect and repair the compressor.
What does error code H33 mean on my Panasonic CS-S12PKV Air Conditioner?
If your Panasonic Air Conditioner displays error code H33, it indicates a signal transmission error due to wrong wiring. This is caused by wrong models interconnected. You should check the wiring connections between the indoor and outdoor units.
General| Type | Split System |
|---|---|
| Inverter | Yes |
| Power Supply | 220-240V, 50Hz |
| Heating Capacity | 4.00 kW |
| Noise Level (Outdoor Unit) | 48 dB |
| Operating Temperature (Cooling) | +16 to +43 °C |
| Operating Temperature (Heating) | -15°C to 24°C |
