To Next PageTo Next PageWhat to do if my Panasonic CS-UE9RKE Air Conditioner is not working efficiently in HEAT/COOL mode?
If your Panasonic Air Conditioner isn't working efficiently in HEAT or COOL mode, make sure you set the temperature correctly. Also, ensure all doors and windows are closed. Clean or replace the filters and clear any obstructions at the air inlet and air outlet vents.
Why does my Panasonic CS-UE9RKE make cracking sounds during operation?
Cracking sounds during operation of your Panasonic Air Conditioner are due to temperature changes causing the expansion and contraction of the unit.
Why is my Panasonic Air Conditioner cooling/heating capacity reduced during the lowest fan speed setting?
The low fan speed is set to prioritize low noise operation, so the cooling or heating capacity may be reduced, depending on the conditions. To increase the capacity, increase the fan speed.
What to do if my Panasonic CS-UE9RKE is noisy during operation?
If your Panasonic Air Conditioner is noisy during operation, check to see if the unit has been installed at an incline. Also, make sure the front panel is closed properly.
Why is the TIMER indicator always on in my Panasonic Air Conditioner?
The TIMER indicator is always on in your Panasonic Air Conditioner because the timer setting repeats daily once it has been set.
Why does my Panasonic Air Conditioner outdoor unit emit water or steam?
The water or steam emitted from your Panasonic Air Conditioner's outdoor unit is due to condensation or evaporation occurring on the pipes.
What to do if my Panasonic Air Conditioner does not receive the signal from the remote control?
If the Panasonic Air Conditioner unit isn't receiving a signal from the remote control, make sure the receiver is not obstructed. Be aware that certain fluorescent lights may interfere with the signal.
What should I do if my Panasonic CS-UE9RKE unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped. Also, check to see if any timers have been set.
What should I do if my Panasonic CS-UE9RKE remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, first, ensure the batteries are inserted correctly. If they are, try replacing them with fresh batteries.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.4 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 9 kg |
| Weight (Outdoor Unit) | 28 kg |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Noise Level (Outdoor Unit) | 47 dB(A) |
| Type | Split system |
| Noise Level (Indoor) | 21 dB |
Step-by-step instructions for inserting batteries into the remote control.
Instructions for setting the clock on the remote control unit.
Explains fundamental operation steps including mode selection and temperature.
Safety guidelines for units, remote control, and power supply, including prohibitions.
Details on selecting modes like AUTO, HEAT, COOL, and DRY for different needs.
Explains POWERFUL and QUIET modes for quick temperature adjustment or noise reduction.
Instructions for adjusting fan speed and manually directing airflow.
Guide for setting ON/OFF timers and understanding the auto restart function.
Steps for cleaning the indoor unit, front panel, and air filters.
Checks for seasonal inspection and preparation for extended periods of non-use.
Lists common occurrences that are normal operations, not malfunctions.
Steps to check for common issues before contacting a service agent.
Procedure to retrieve error codes using the remote control for diagnosis.
Guidance on proper disposal of used electrical equipment and batteries.
