12
To learn more...
Operation mode
iCOMFORT : The fast cooling is ideal on a hot day.
COOL : Provides effi cient comfort cooling to suit your needs.
DRY : Unit operates at low fan speed to give a gentle cooling operation.
nanoe-G in-fi lter deactivation
Depending on the unit’s accumulated operation time, nanoe-G in-fi lter deactivation may be activated only
once a day after the unit is turned off.
To remove the moisture left in the internal parts, the fan will operate for 30 minutes with the fl ap opened
slightly. This process is only applicable when the unit is operated in COOL/DRY mode before turned off.
Then, nanoe-G deactivates viruses/bacteria on the fi lter for 2 hours with the fan stopped and fl ap closed.
Do not turn off the power supply during this operation. After power failure, this operation will not resume.
DUST SENSOR function
• Depending on the level of particles detected by the dust sensor, nanoe-G generator is optimally
controlled to purify the air, thus creating a clean room environment.
• This feature is automatically turned ON when unit is operated. It is turned OFF if nanoe-G is turned ON
manually.
• During the initialization (when unit is turned ON or nanoe-G is turned OFF manually), the dust sensor
indicator turns RED for 20 seconds.
• If the dust sensor detects a high level of particles, the dust sensor indicator turns RED and nanoe-G
turns ON.
• If the dust sensor detects a low level of particles, the dust sensor indicator turns WHITE and nanoe-G
turns OFF.
Operation conditions
Use this air conditioner under the following temperature range.
DBT : Dry bulb temperature
WBT : Wet bulb temperature
Temperature (°C)
Indoor Outdoor
DBT WBT DBT WBT
COOL
Max. 32 23 43 26
Min. 16 11 16 11
To Next Page
Loading...
Need help?
General
