Panasonic CS-W7DKE

Unit CS-W12DKE CU-W12DKE
Dimensions Height inch (mm) 11 - 1/32 (280) 21 - 1/4 (540)
Width inch (mm) 31 - 15/32 (799) 30 - 23/32 (780)
Depth inch (mm) 7- 7/32 (183) 11 - 3/8 (289)
Net Weight lb (kg) 20 (9.0) 77 (35)
Compressor Description — Rotary (1 cylinder)
rolling piston type
Motor Type — Induction (2-poles)
Rated Output W — 900
Air Circulation Description Cross-flow Fan Propeller Fan
Material ASG20k1 PP Resin
Motor Type Induction (4-poles) Induction (6-poles)
Input W 47 73
Rated Output W 15 33
Fan Speed Low rpm Cooling; 900 —
Heating; 960
Medium rpm Cooling; 1,120 —
Heating; 1,120
High rpm Cooling; 1,280 845
Heating; 1,310
SuperHigh rpm Cooling; 1,310 —
Heating; 1,310
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Blue Coat)
Fin Type Slit Fin Corrugate Fin
Row / Stage (Plate fin configuration, forced draft)
2 × 15 2 × 24
FPI 21 17
Size (W × H × L) mm 610 × 315 × 25.4 705.8
735.1
× 504 × 36.38
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (cm
3
) — FV50S (350)
Refrigerant (R-410A) g (oz) — 1,090 (38.5)
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Tube Length mm — Cooling; 1,175, Heating; 525
Flow Rate l/min — Cooling; 4.7 Heating; 8.6
Inner Diameter mm — Cooling; 1.2, Heating; 1.3
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 25 µF, 370VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 440VAC 2.0 µF, 440VAC
•
Specifications are subject to change without notice for further improvement.
12
CS-W7DKE CU-W7DKE / CS-W9DKE CU-W9DKE / CS-W12DKE CU-W12DKE