Unit CS-W12CKP CU-W12CKP5
Net Weight lb (kg) 20 (9.0) 77 (35)
Compressor Type — Rotary (1 cylinder)
rolling piston type
Motor Type — Induction (2-poles)
Rated Output W — 830
Air Circulation Type Cross-flow Fan Propeller Fan
Material AS + Glass Fiber 20% PP Resin
Motor Type Induction (4-poles) Induction (6-poles)
Input W 49.2 67.4
Rated Output W 15 33
Fan Speed Low rpm Cooling; 900 —
Heating; 960
Medium rpm Cooling; 1,120 —
Heating; 1,120
High rpm Cooling; 1,260 845
Heating; 1,300
SuperHigh rpm Cooling; 1,300 —
Heating; 1,300
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Blue Coat)
Fin Type Slit Fin Corrugate Fin
Row / Stage (Plate fin configuration, forced draft)
2 × 15 2 × 24
FPI 21 17
Size (W × H × L) mm 610 × 315 × 25.4 705.8
735.1
× 504 × 18.9
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (cm
3
) — FVC68D (330)
Refrigerant (R-410A) g (oz) — 1,060 (37.4)
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Tube Length mm — Cooling; 970, Heating; 590
Flow Rate l/min — Cooling; 5.0, Heating; 8.2
Inner Diameter mm — Cooling; 1.2, Heating; 1.3
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 35 µF, 370VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 400VAC 2.0 µF, 450VAC
•
Specifications are subject to change without notice for further improvement.
11
CS-W7CKP CU-W7CKP5 / CS-W9CKP CU-W9CKP5 / CS-W12CKP CU-W12CKP5
To Next Page
Loading...
Need help?
General
