Panasonic CS-XU9XKH-8 - To Learn More; Operation Mode Details; Energy Saving and Airflow Control

35
To Learn More...
How to Use / To Learn More...
Operation mode
*1
Cooling model
iAUTO-X : Provides fast cooling operation which is ideal on a hot day.
COOL : Provides effi cient comfort cooling to suit your needs.
DRY : Operates at low fan speed for a gentle cooling operation.
*2
Heatpump model
AUTO : During operation, the POWER indicator will blinks at initial.
• Unit selects operation mode every 10 minutes according to the setting and
room temperatures.
HEAT : The POWER indicator blinks at the initial stage of this operation. Unit takes a
while to warm up.
COOL : Provides effi cient comfort cooling to suit your needs.
DRY : Operates at low fan speed for a gentle cooling operation.
iAUTO-X : Provides fast cooling operation which is ideal on a hot day.
Energy saving temperature setting
You may save energy when operating the unit within the recommended temperature range.
HEAT : 20.0 °C ~ 24.0 °C / 68 °F ~ 75 °F. (*
2
Heatpump model)
COOL: 26.0 °C ~ 28.0 °C / 79 °F ~ 82 °F.
Air fl ow direction
In COOL/DRY mode:
The horizontal fl ap is fi xed at middle position setting.
Once the temperature is achieved, the horizontal fl ap swings up/down automatically.
In HEAT mode (
*2
Heatpump model):
If AUTO is set, the horizontal fl ap is fi xed at the predetermined position. The vertical
fl ap swings left/right after the temperature rises.
In iAUTO-X mode:
The horizontal fl ap swings up/down automatically at a predetermined position.
Once the temperature is achieved, the horizontal fl ap is fi xed at upper position.
In COOL/DRY/iAUTO-X/HEAT (
*2
Heatpump model) mode:
The horizontal fl ap swings up/down automatically.
Auto restart control
When power is resumed after a power failure, the operation will restart automatically with the
last operation mode and airfl ow direction.
• This control is not applicable when TIMER is set.
English