To Next PageTo Next PageWhat to do if the Panasonic CS-XE9EKE Air Conditioner front panel doesn't open or fully open?
If the front panel of your Panasonic Air Conditioner is interrupted during operation and doesn't open or fully open, press the OFF/ON button to stop the air conditioner. Then, use a sharp object to press the RESET button.
General| Brand | Panasonic |
|---|---|
| Model | CS-XE9EKE |
| Category | Air Conditioner |
| Language | English |
Explains warning/caution symbols and provides general safety guidelines.
Technical specifications for the CS-XE9EKE/CU-XE9EKE models.
Technical specifications for the CS-XE12EKE/CU-XE12EKE models.
Identifies controls and components of the indoor unit.
Identifies controls and components of the outdoor unit.
Details the controls and functions of the remote controller.
Provides physical dimensions for the indoor unit and remote control.
Provides physical dimensions for the outdoor unit.
Illustrates the wiring connections for the indoor unit.
Illustrates the wiring connections for the outdoor unit.
Shows the layout of the indoor unit's printed circuit board.
Details the indicator lights on the PCB.
Explains the diagnosis display and controls on the PCB.
Shows the layout of the outdoor unit's printed circuit board.
Guidelines for choosing the optimal installation location for indoor and outdoor units.
Covers fixing the installation plate, drilling holes, and installing the ventilation hose.
Covers outdoor unit mounting, piping connection, and evacuation.
Overview of the unit's basic operating principles and inverter control.
Details vertical and horizontal airflow control methods.
Explains the quiet operation mode for cooling and dry modes.
Explains the quiet operation mode for heating.
How the powerful mode achieves rapid temperature changes.
Setting the ON timer for delayed operation.
Setting the OFF timer for scheduled shutdown.
How the unit resumes operation after a power interruption.
Beep sounds indicating remote control signal reception.
Explains auto, force, timer, and manual filter cleaning modes.
Explains simultaneous and independent ventilation control.
Compressor delay before starting after stopping.
Prevents compressor stopping within 30 seconds of starting.
Monitors and controls total running current to prevent overload.
Protection against IPM overload and overheating.
Prevents compressor overheating based on discharge pipe temperature.
Protects against high outdoor pressure during cooling/dry operations.
Protection against refrigeration cycle abnormalities.
Detects four-way valve operation abnormalities between cooling/heating.
Prevents indoor heat exchanger freezing during cooling/dry modes.
Adjusts operation based on outdoor air temperature.
Adjusts operation based on indoor air temp. during heating.
Using the Auto OFF/ON button for servicing functions and limited operation.
Covers remote control number, current settings, and ventilation modes.
Configures automatic filter cleaning operation settings.
Mode for setting individual unit correspondence.
How to select and set remote control transmission codes.
Analysis of the refrigeration cycle for diagnosing malfunctions.
Correlations between unit condition, pressure, and electric current.
How to use the self-diagnosis function and interpret error codes.
A comprehensive table of error codes, their meanings, and verification locations.
Troubleshooting for the movable front panel not opening correctly.
Notes on the initial filter cleaning cycle after installation.
Troubleshooting filter cleaning operation errors.
Troubleshooting ventilation operation errors.
Step-by-step guide for removing indoor unit components.
Detailed steps for removing the filter cleaning device.
Steps for removing the ventilation device.
Instructions for removing the gear mechanism.
Procedures for removing the outdoor propeller fan and fan motor.
Technical data charts for CS-XE9EKE/CU-XE9EKE cooling operations.
Data on cooling performance variation with piping length.
Heating performance data based on outdoor temperature.
Heating performance data variation with piping length.
Technical data charts for CS-XE12EKE/CU-XE12EKE cooling operations.
Data on cooling performance variation with piping length for XE12EKE.
Heating performance data for XE12EKE based on outdoor temperature.
Heating performance data for XE12EKE variation with piping length.
Charts showing sensible and total cooling capacity.
Exploded view and parts list for the indoor unit.
Exploded view and parts list for the outdoor unit.
