Panasonic CS-XE9EKE

49
16 Disassembly and Assembly Instructions
16.1. Indoor Electronic Controller, Auto Cleaning, Cross Flow Fan and Fan
Motor Removal Procedures
1. Open and release the Intake Grille complete (Front). (Fig. 1)
Fig. 1
2. Remove the Intake Grille Complete (Top). (Fig. 2)
3. Remove the Front Grille Complete (Right) by releasing the 2 screws.
(Fig. 2)
4. Remove the Front Grille Complete (Left) by releasing the 2 screws.
(Fig. 2)
5. Remove the 2 Plate Cover. (Fig. 2)
Fig. 2
6. Remove the Control Board Cover. (Fig. 3)
Fig. 3
7. Remove the Particular Piece by screw. (Fig. 4)
8. Remove the Earth Wire screws. (Fig. 4)
9. Releasing CN-STM4, CN-STM2, CN-STM1, CN-ACLN, CN-STM3,
CN-SW & CN-DISP (Fig. 4)
Fig. 4