53
16.2. Filter Cleaning Device Complete Removal Instructions
Tools Required:
• Screw driver (+ type)
• Cutter
Switch off the power supply and unplug before cleaning or servicing.
1. Remove the front intake grille.
2. Push to remove top intake grille.
3. Release 2 caps and unscrew.
4. Unscrew and then remove the particular piece (right).
5. Unscrew and remove the particular pieces (left and bottom).
Caution: The particular piece (bottom) may drop out while
removing.
6. Remove terminal cover.
7. Cut the cable tie.
To Next Page
Loading...
