Panasonic CS-XE18WKUAW User Manual

© Panasonic Corporation 2020.
Order No: PAPAMY2001025CE
Air Conditioner
Indoor Unit Outdoor Unit
CS-XE9WKUAW
CS-XE12WKUAW
CS-XE15WKUAW
CS-XE18WKUAW
CS-XE24WKUAW
CU-XE9WKUA
CU-XE12WKUA
CU-XE15WKUA
CU-XE18WKUA
CU-XE24WKUA
Destination
U.S.A.
Canada
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the products dealt with in this service information by anyone else could result in serious injury or death.
PRECAUTION OF LOW TEMPERATURE
In order to avoid frostbite, be assured of no refrigerant leakage during the installation or repairing of refrigerant circuit.
MODE
AIR SW ING
TEMP
MODE RFP
RFP
AIR SW ING
TEMP
POWERFUL
FAN SPE ED/
QUIET
OFF/ON
IMPORT
A
NT S
A
FETY NOTICE
There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic
Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced
with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of
manufacturer.
!

Panasonic CS-XE18WKUAW Specifications

General

Inverter Technology	Yes
Refrigerant	R32
Type	Split AC
Noise Level (Indoor)	44 dB
Operating Temperature (Heating)	24 degree C

Summary

Safety Precautions and Guidelines

Understanding Safety Indications

Defines WARNING and CAUTION indications and their associated symbols.

Installation Safety Precautions

Lists essential safety measures for electrical work, wiring, and installation.

Installation and Connection Procedures

Site Selection and Preparation

Guidelines for choosing optimal installation locations for indoor and outdoor units.

Indoor Unit Installation Steps

Outdoor Unit Installation and Piping

Electrical Connections and Evacuation

Protection Controls and Troubleshooting

System Protection Mechanisms

Breakdown Diagnosis and Error Codes

Guide to using self-diagnosis and interpreting error codes for troubleshooting.

Troubleshooting Specific Malfunctions

Detailed troubleshooting steps for common errors like communication or sensor faults.

Exploded Views and Parts Identification

Indoor Unit Exploded View and Parts List

Diagram and list identifying all parts of the indoor unit.

Outdoor Unit Exploded View and Parts List