To Next PageTo Next PageWhy Panasonic CU-2RE15SBE Air Conditioner unit doesn't receive signal from remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer for assistance.
Why is the TIMER indicator always on in my Panasonic Air Conditioner?
The TIMER indicator on your Panasonic Air Conditioner remains on because the timer setting repeats daily once it has been set.
Why does my Panasonic Air Conditioner outdoor unit emit water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Why indoor fan stops during heating in Panasonic CU-2RE15SBE?
If the indoor fan stops occasionally during heating operation of your Panasonic Air Conditioner, it is to avoid unintended cooling effect.
Why is the cooling/heating capacity reduced on my Panasonic CU-2RE15SBE Air Conditioner at the lowest fan speed?
If you've noticed a reduction in cooling/heating capacity during the lowest fan speed setting on your Panasonic Air Conditioner, it's because the low fan speed prioritizes low noise operation, which can reduce cooling/heating capacity. To increase capacity, increase the fan speed.
Why POWER indicator blinks in HEAT mode of Panasonic Air Conditioner?
The POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed) because the unit is in defrost mode (and AIR SWING is set to AUTO).
Why is there a delay after restarting my Panasonic CU-2RE15SBE Air Conditioner?
The delay in operation after restarting your Panasonic Air Conditioner is a protection mechanism for the unit's compressor.
What causes the water flowing sound in my Panasonic Air Conditioner?
The water flowing sound you hear during the operation of your Panasonic Air Conditioner is due to the refrigerant flow inside the unit.
Why the room has a peculiar odour when using Panasonic CU-2RE15SBE Air Conditioner?
If you notice a peculiar odour in the room when using your Panasonic Air Conditioner, it may be due to damp smells emitted by the wall, carpet, furniture, or clothing.
Why does the POWER indicator blink during HEAT mode in my Panasonic CU-2RE15SBE Air Conditioner?
If the POWER indicator blinks during HEAT mode with no warm air supply and the louver is closed on your Panasonic Air Conditioner, the unit is in defrost mode, and AIR SWING is set to AUTO.
General| Brand | Panasonic |
|---|---|
| Model | CU-2RE15SBE |
| Category | Air Conditioner |
| Language | English |
Explains warning symbols for serious injury and caution symbols for property damage.
Details compulsory actions and prohibited actions using symbols.
Safety guidelines for unit operation, remote control, and power supply.
Warnings about R32 refrigerant risks and safe handling precautions.
Safety related to refrigerant circuits, ventilation, and installation compliance.
Requirements for service personnel and safety procedures during work.
Procedures for leak detection, fire extinguishers, and ignition source control.
Checks for refrigeration equipment, electrical devices, and safety compliance.
Safety for sealed component repairs, intrinsically safe components, and cabling.
Methods for leak detection and safe evacuation of refrigerants.
Procedures for refrigerant charging and unit decommissioning.
Guidelines for equipment labelling and safe refrigerant recovery processes.
