To Next PageTo Next PageWhy does my Panasonic CU-PC18QKH Air Conditioner remote control not work?
If your Panasonic Air Conditioner's remote control isn't working, ensure the batteries are correctly inserted and replace them if they are weak.
How to improve the cooling efficiency of my Panasonic Air Conditioner?
If your Panasonic Air Conditioner is not cooling efficiently, make sure you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
What to do if my Panasonic CU-PC18QKH Air Conditioner does not receive the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorised dealer.
Why is the electric current too high in my Panasonic CU-PC18QKH?
The electric current might be too high in your Panasonic Air Conditioner because of a dusty condenser, preventing heat radiation during operation. Measuring electric current during operation can help diagnose this issue.
Why is there high pressure on the gas side of my Panasonic CU-PC18QKH Air Conditioner?
High pressure on the gas side of your Panasonic Air Conditioner may be caused by an inefficient compressor. Measuring gas side pressure can help to determine if this is the case.
How to check insufficient compressing of a compressor in Panasonic Air Conditioner?
To check for insufficient compressing of a compressor in your Panasonic Air Conditioner, look for these signs: the electric current during operation becomes approximately 20% lower than the normal value, the discharge tube of the compressor becomes abnormally hot (normally 70°C to 90°C), and the difference between high pressure and low pressure becomes almost zero.
General| Brand | Panasonic |
|---|---|
| Model | CU-PC18QKH |
| Category | Air Conditioner |
| Language | English |
Lists the indoor and outdoor unit model numbers for the Panasonic Air Conditioner.
Step-by-step instructions for inserting AAA or R03 batteries into the remote control.
Guide on how to set the clock on the remote control unit.
Instructions for selecting operating mode, starting/stopping, and adjusting temperature.
Illustrates the buttons and functions of the remote control.
Lists included accessories like remote control, batteries, and holder.
Covers warnings for unit operation, potential hazards, and prohibited actions.
Precautions related to the physical installation and operation of the unit.
Precautions regarding the power cord, plug, grounding, and ELCB/RCD usage.
Safety advice for remote control usage, especially concerning batteries and children.
Explanation of the iAUTO mode for quick temperature adjustment and its operation.
Guide to choosing between iAUTO, COOL, and DRY modes for different environmental needs.
Instructions on how to manually adjust the horizontal airflow direction.
How to operate the unit using the auto OFF/ON button on the unit itself.
How to select and adjust the fan speed for the air conditioner.
Instructions for adjusting the vertical airflow (louver) direction.
Procedure for setting the timer to turn the unit ON or OFF at a specific time.
Important safety and cleaning guidelines before maintaining the unit.
Instructions for wiping the unit and cleaning the front panel.
Guide on washing and drying air filters every two weeks.
Checks for extended non-use periods and seasonal storage.
Symptoms that do not indicate a malfunction and their causes.
Checks to perform before calling for professional servicing.
Conditions requiring immediate shutdown and consultation with an authorized dealer.
Information on discarding old equipment and batteries according to regulations.
