Panasonic CU-XE24WKUA User Manual

© Panasonic Corporation 2020.
Order No: PAPAMY2001025CE
Air Conditioner
Indoor Unit Outdoor Unit
CS-XE9WKUAW
CS-XE12WKUAW
CS-XE15WKUAW
CS-XE18WKUAW
CS-XE24WKUAW
CU-XE9WKUA
CU-XE12WKUA
CU-XE15WKUA
CU-XE18WKUA
CU-XE24WKUA
Destination
U.S.A.
Canada
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the products dealt with in this service information by anyone else could result in serious injury or death.
PRECAUTION OF LOW TEMPERATURE
In order to avoid frostbite, be assured of no refrigerant leakage during the installation or repairing of refrigerant circuit.
MODE
AIR SW ING
TEMP
MODE RFP
RFP
AIR SW ING
TEMP
POWERFUL
FAN SPE ED/
QUIET
OFF/ON
IMPORT
A
NT S
A
FETY NOTICE
There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic
Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced
with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of
manufacturer.
!

Panasonic CU-XE24WKUA Specifications

General

Brand	Panasonic
Model	CU-XE24WKUA
Category	Air Conditioner
Language	English

Summary

Safety Precautions

Features

Inverter Technology

Explains benefits of inverter technology like energy saving and precise control.

Operation Improvement

Highlights features like quiet mode and powerful mode operation.

Location of Controls and Components

Indoor Unit Controls and Components

Identifies and describes components on the indoor unit.

Remote Control Functions

Explains the operation and features of the remote control.

Dimensions

Indoor Unit Dimensions and Installation

Provides detailed dimensions and mounting plate information.

Installation Instructions

Select Best Location for Installation

Guidance on choosing suitable installation sites for optimal performance.

Indoor Unit Installation Procedures

Step-by-step guide for installing the indoor unit correctly.

Operation Control

Basic Function and Inverter Control

Explains fundamental operation and the benefits of inverter technology.

Automatic Operation Modes

Details various automatic operation modes and fan speed settings.

Troubleshooting Guide

Breakdown Self Diagnosis Function

Explains the self-diagnosis system and how to perform it.

Error Codes Table

Comprehensive list of error codes, their causes, and troubleshooting steps.

Disassembly and Assembly Instructions

Indoor Unit Component Removal

Procedures for removing common components from the indoor unit.

Exploded View and Replacement Parts List

Indoor Unit Exploded View and Parts List

Visual diagram and list of parts for indoor unit disassembly and replacement.