Panasonic CZRWSU2N - Emergency Operation; When to Use Emergency Operation; Emergency Start and Stop Procedures

12. Emergency Operation
21
(EN)
ENGLISH
Use [Emergency Operation] in the following situations when there is an urgent need.
• When the remote controller’s batteries have failed.
• When the remote controller is broken.
• When the remote controller is lost.
*
1
Figures: CZ-RWSU2N, CZ-RWSD2, and CZ-RWST3N are of receivers
(inside indoor unit), CZ-RWSL2N is of the operation panel (inside indoor
unit) and indoor unit (CZ-RWSK2) is of its front panel.
CZ-RWSU2N/CZ-RWSD2/Indoor Unit (CZ-RWSK2)/CZ-RWST3N
CZ-RWSL2/CZ-RWSC3
Start: press [Emergency Operation]
of the receiver.
If the indoor temperature is 24 °C or greater when the unit starts running, it
will act as a cooler.
If the indoor temperature is less than 24 °C when the unit starts running, it
will act as a heater.
Stop: press [Emergency Operation] of the receiver again.
CZ-RWSD2
Start/Stop
Start/Stop
CZ-RWSU2N
CZ-RWST3N
Start/Stop
Start/Stop
Start/Stop
Start/Stop
Start/Stop
TIMEROPERATION
STANDBY
CZ-RWSL2N CZ-RWSC3
00OI303000.indb2100OI303000.indb21 2015/02/2016:23:082015/02/2016:23:08