How to fix Panasonic Water Heater if water is not drawn normally?
If water is not being drawn normally from your Panasonic Water Heater: * Check the Filter Unit and clean it if it's clogged with dirt. * Inspect the Shower Head and Shower Plate, cleaning them if they are blocked by dirt.
What to do if no water flows from Panasonic Water Heater shower head?
If no water is flowing from the shower head of your Panasonic Water Heater, check the Water Volume Knob and turn it clockwise if it's closed. Also, ensure the Main Water Valve is turned 'ON'.
What to do if no hot water comes out of my Panasonic Plumbing Product?
If no hot water is coming out of your Panasonic Plumbing Product and there's no electric supply to the unit, first ensure the Main Switch Knob is in the “On” position. Then, check that the ELB Reset Lever is not slid down; push it up to reset the ELB. Also, make sure the ON/OFF DP (double pole) Switch and the Miniature Circuit Breaker (MCB) are switched on.
How to fix Panasonic Plumbing Product when water is not drawn normally?
If water is not being drawn normally by your Panasonic Plumbing Product, examine the Filter Unit and clean it if it's clogged with any stain or dirt. Also, inspect the Shower Head and Shower Plate, cleaning them if they are blocked by dirt.
What to do if no water flows from the shower head of my Panasonic Plumbing Product?
If no water flows from the Shower Head of your Panasonic Plumbing Product, check the Water Volume Knob and turn it clockwise if it's closed. Also, inspect the Main Water Valve and turn it "ON" if it is closed.
General| Power Rating | 3.5 kW |
|---|---|
| Voltage | 230 V |
| Color | White |
| Water Connection | 1/2 inch |
| Material | Plastic |
| Spray Modes | 3 spray modes |
| Hose Length | 1.5 meters |
To Next Page
