Turn your PC (Personal Computer) on
and start up Windows.
Insert PHOTOVU LINK DRIVER Disk
into a floppy disk drive.
Click on Start, then "Run..."
Type in "a:_etup.exe" and click OK.
• If your 3.5 inch floppy disk drive is not
"A", use the appropriate letter.
Follow the instructions as they appear
on the PC screen until the installation
is complete.
• Setup window will disappear when
the installation is complete.
l;tllalllll[,ii t'r+,'r_1I_1
,
PHOTOVU LINK:
You can transfer images from your
Palmcorder tape to your PC.
Before you begin
Insert the Tape. (See page 9.)
• Make Palmcorder-PC connections.
(See page 46.)
Turn your PC on,
Set Patmcorder POWER to VCR,
Click on Start, "Programs,"
+'Panasonic," "Palmcorder," then
"PHOTOVU LINK."
"PHOTOVU LINK" is opened.
• COM Port and Baudrate are automatically
selected.
Refer to Help for information about
application operations and other Error
messages.
47
To Next Page
Loading...
