45
Recording
(ENG) VQT4S33
Bracket setting is performed based on the adjustment values for the White Balance fine
adjustment, and 3 pictures with different colors are automatically recorded when the
shutter button is pressed once.
1 Press [ ].
2 Rotate the rear dial or front dial to select the White
Balance, and then press 4.
3 Rotate the control dial to set the bracket.
Rotating the control dial to the right: Horizontal ([A] to [B])
Rotating the control dial to the left: Vertical ([G] to [M])
•
You can also set the bracket by touching [ ]/[ ].
• To reset, press [DISP.].
4 Press [MENU/SET].
Set the White Balance value. Use to match the condition when taking photographs.
1 Press [ ].
2 Rotate the rear dial or front dial to select [ ], [ ], [ ], or [ ], and then
press 3.
3 Aim the camera at a sheet of white paper etc. so that the
frame in the center is filled by the white object only and
then press [MENU/SET].
You can set the color temperature manually for taking natural pictures in different lighting
conditions. The color of light is measured as a number in degrees Kelvin. As the color
temperature increases, the picture becomes more bluish. As the color temperature
decreases, the picture becomes more reddish.
1 Press [ ].
2
Rotate the rear or front dial to select [ ], and then press
3
.
3 Press 3/4 to select the color temperature and then press
[MENU/SET].
•
You can set a color temperature from [2500K] to [10000K].
White Balance Bracket
Setting the White Balance manually
Setting the color temperature
GGGGGG
AAAAAABBBBBBB
MMMMMM
1 2
DMC-GH3PPC-VQT4S33_eng.book 45 ページ ２０１２年１０月２２日 月曜日 午後３時２分
To Next Page
Loading...
