- 72 -
Q&A Troubleshooting
Others
Menu not displayed in desired language.
●
Change [Language] setting (→28).
Camera is hot.
●
Camera may become a little warm during use, but this does not affect performance or
quality.
Lens makes a clicking noise.
●
When brightness changes, the lens may make a clicking noise and the monitor
brightness may also change, but this is due to aperture settings being made.
(Does not affect recording.)
Clock is incorrect.
●
Camera has been left for a long period.
→ Reset the clock (→14).
When using zoom, picture becomes slightly warped and the edges of the subject
become colored.
●
Pictures may be slightly warped or colored around the edges, depending on the zoom
ratio, but this is not a fault.
File numbers are not recorded in sequence.
●
File numbers are reset when new folders are created (→57).
File numbers have jumped backwards.
●
Batteries were removed/inserted with power on.
(Numbers may jump backwards if folder/file numbers are not correctly recorded.)
To Next Page
Loading...
