VQT2W84 (ENG)
26
[REC] Mode:
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the
difference in brightness between the subject and the background. Look at the
following examples.
Press the rear dial to select [È], and
then rotate the rear dial to
compensate the exposure.
A Exposure compensation value
• Enabled operation will switch every time the
rear dial is pressed.
• Exposure compensation operation is enabled
when [È] at the bottom left of the screen
changes to orange.
• The exposure compensation value can be set
within a range of j3EV to i3EV.
• Select [È] only to return to the original
exposure (0 EV).
Take a picture.
DMC-LX5PC-VQT2W84_eng.book 26 ページ ２０１０年７月１日 木曜日 午後５時３５分
To Next Page
Loading...
