19
(ENG) VQT4J93
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
• Check following regarding the wireless access point.
> The wireless access point information set on this camera is wrong. Check the
authentication type, encryption type, and encryption key.
> Power of the wireless access point is not turned on.
> Setting of the wireless access point is not supported by this unit.
• Check the network setting of the destination.
• Radio waves from other devices may block the connection to a wireless access point.
Check other devices that are connected to the wireless access point and devices that use
the 2.4 GHz band.
DMC-SZ5P-VQT4J93_eng.book 19 ページ ２０１２年７月５日 木曜日 午前１０時４０分
To Next Page
Loading...
