Q&A Troub[eshoot[n 9 (Continued)
Brightness or coloring of recorded picture different from real life.
*_Taking pictures under fluorescent lighting may require a faster shutter speed and result in slightly
changed brightness or coloring, but this is not a fault.
Red banding may appear on the LCB monitor or part or the entire screen
may have a reddish tint, when recording or pressing the shutter button
halfway.
*_This is a characteristic of CCD and may appear if subject contains brighter areas.
Some blurring may occur around these areas, but this is not a fault, This will be
recorded in motion pictures, but not in still pictures,
_aWe recommend keeping the screen away from strong light sources such as sunlight when taking
pictures,
Motion picture recording stops midway.
_ With some cards, access display may appear briefly after recording, and recording may end midway.
*_ Using a card of SD speed 'Class 4 '_ or above is recommended for recording motion pictures in
[AVCHD Lite(GPS REC)]/[AVCHD Lite],
Using a card of SD speed 'Class 6'* or above is recommended for recording motion pictures in
'MOTION JPEG',
* The SD speed class is a speed rating for continuous writing,
*_ If recording stops even when using the card above, the data writing speed is low, We recommend
backing up the data on the memory card and reformatting it (--_28),
The subject cannot be locked. (AF track fails)
*_ If the subject has different colors as the periphery, set the AF area to those colors specific to the
subject by aligning that area with the AF area. (--_100)
LCD monitor dims during motion picture recording.
*_ LCD monitor may dim if continuing motion picture recording for long periods.
Brightness is unstable.
® Aperture value is set while shutter button is pressed halfway.
(Does not affect recorded picture.)
Monitor flickers indoors.
® Monitor may flicker after turning on (prevents influence from fluorescent lighting).
Monitor is too bright/too dark.
*_ Camera set to [LCD MODE] (_23).
Black/blue/red/green dots or interference appears. Monitor looks distorted when
touched.
_ This is not a fault, and will not be recorded on the actual pictures, so there is no need to worry.
Date/age is not displayed.
*_ Current date, travel elapsed days (_90), and names and ages in [BABY] and [PET] (--_65) Scene
Modes are only displayed for approx. 5 sec. when the camera is turned on, after these settings
are made, or after switching from Playback Mode to Recording Mode, etc. They cannot be always
displayed.
158 VQT2R20
To Next Page
Loading...
