Panasonic DMP-BD60 Installation Manual

HD-MOD DMP-BD60/80 NB
BluRayMods.com ©2008-2009 Page - 1 -
Panasonic DMP-BD60/80
Installation Manual
Please note that this modification to your player invalidates any warranty that
may already exist on your player.
Introduction
Installing this modification is difficult. It requires soldering on to some very small components on
the mainboard.
You will require a
 Fine tip soldering iron (max 25 watt)
 Solder flux etc.
 Some lengths of thin wire
 Philips screwdriver
 Double sided tape.
General information
The installation of the ICOS HD Multi region chip is difficult. If you are not experienced with
soldering, please let us install the kit for you.
This modification is done entirely at your own risk. We do NOT accept any liability in the
event of damage to your BD-player in the process of installation of the chip or in the usage
of the modification.
If you have never used a soldering iron or are not competent with it, please do not attempt
to perform this modification.
We recommend you read this manual completely before installing this modification.

Panasonic DMP-BD60 Specifications

General

Type	Blu-ray Player
BD-Live	Yes
Output Resolution	1080p
Audio Decoding	Dolby Digital, Dolby Digital Plus, DTS, DTS-HD
Video Upscaling	Yes
HDMI Output	Yes
Ethernet Port	Yes
USB Port	Yes
Component Video Output	Yes
Composite Video Output	Yes
Dolby Digital Decoding	Yes
Dolby Digital Plus Decoding	Yes
DTS Decoding	Yes
DTS-HD Decoding	Yes
Progressive Scan	Yes
Remote Control	Yes
Blu-ray Profile	2.0
Supported Discs	BD, DVD, CD
Digital Audio Output	Optical
Analog Audio Output	Yes