Panasonic DMP-BD833 - Connections and Settings; Connecting to a TV

- 10 -
Connections and settings
Connections and settings
Connecting to a TV
Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or
[BDT271/270]
[BDT175/174/171/170]
24p (4K) signal, please use HDMI cables 5.0 meters or less.
≥ This unit consumes a small amount of AC power (> 34) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
≥
[BDT166/165] [BD833/83] The unit is in the standby condition when the AC adaptor is connected. The primary
circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
HDMI IN
HDMI cable
[BDT271/270]
[BDT175/174/171/170]
[BDT166/165]
[BD833/83]
AC mains lead (supplied)
[BDT271/270]
[BDT175/174/171/170]
To a household mains
socket
[BDT166/165]
[BD833/83]
AC adaptor (supplied)