- 35 -
Settings
∫ Easy Settings
You can execute basic settings.
∫ TV Settings
Press [OK] to show the following settings:
¾ TV Aspect
Set to match the type of TV connected.
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
¾ Screen Saver Function
This is to prevent image retention on the
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
¾ On-Screen Messages
Choose whether to show status messages
automatically.
¾ HDMI CEC
≥ Select “Off” when you do not want to use
“HDMI CEC”.
System
4:3 Pan & Scan
The sides are
cut off so the
picture fills
the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
4:3 Letterbox
Black bands
appear at
the top and
bottom of
the picture.
16:9
Video is displayed as a 4:3
ratio image in the centre of
the screen.
16:9 full
Video is displayed as a
horizontally stretched 16:9
image.
¾ TV System
Perform the setup so it matches the TV System
of the connected TV.
Set to use “HDMI CEC” function when
connected via HDMI cable to a device that
supports “HDMI CEC”.
To Next Page
Loading...
