Getting started
- 9 -
[BDT335]
Pull to flip down the
front panel.
Pull to flip down the front panel.
[BDT235] [BDT234]
1 Disc tray (> 17)
2 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
3 [BDT 335] Blue LED
It is possible to set the LED to turn on/off.
(> 36)
4 SD card slot (> 17)
5 [BDT 335] V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(> 36)
6 USB ports (> 17)
7 Display
8 Open or close the disc tray (> 17)
9 Stop (> 20)
10 Start play (> 20)
11 Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Rear panel terminals (> 10–13)