Panasonic DMP-UB900 - Connecting Audio Outputs; Digital Audio Connections; Analog Audio Connections

12
SQT1293
Connect terminals of the same colour.
Set the speaker presence and size according to your environment. (> 31)
(Audio is not output from HDMI OUT terminal.)
Enjoying audio with an amplifier connected to the DIGITAL AUDIO OUT/Analogue AUDIO OUT
terminals
Setting
Set the following items in the setup menu (> 29):
≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)
≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)
≥ To enjoy audio with an amplifier connected to the OPTICAL/COAXIAL terminal or 2ch AUDIO OUT
terminals:
Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)
To enjoy audio with an amplifier connected to the 7.1ch AUDIO OUT teminals:
Set “Analogue Multi Channel” to “On”. (> 31)
OPTICAL/COAXIAL (DIGITAL AUDIO OUT)
2ch AUDIO OUT (Analogue AUDIO OUT)
OPTICAL IN
COAXIAL IN
Optical digital cable
OR
Coaxial cable
Amplifier/receiver
7.1ch AUDIO OUT (Analogue AUDIO OUT)
AUDIO IN
L
R
Audio cable
Amplifier/receiver
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
Cable connections
A Front speaker (L/R)
B Surround speaker (L/R)
C Centre speaker
D Subwoofer
E Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
DMP-UB900_EB-SQT1293.book 12 ページ ２０１６年３月７日 月曜日 午後３時３７分