24
SQT1293
You can share photos, videos and music stored in
the DLNA Certified media server [PC,
smartphone, recorders, etc.] connected to your
home network.
≥ About support format of DLNA (> 41).
≥ When connected to Panasonic DLNA
compatible recorders, register this unit to your
Panasonic DLNA compatible recorders.
1 Press [DLNA].
≥ The list can be updated by pressing the red
button on the remote control.
≥ The connection method can be switched to
Wi-Fi Direct by pressing the green button
on the remote control.
2 Select the equipment and press [OK].
3 Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
To exit from Home Network
Press [HOME].
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to playback contents
from DLNA server on the Renderer (this unit).
Possible applications:
* DMC compatible software should be installed.
Preparation
Perform the “Remote Device Settings”. (> 33)
≥ You can register up to 16 devices.
1 Press [HOME].
2 Select “Home Network”.
3 Select “Media Renderer”.
4 Select “Home Network” or “Wi-Fi Direct”
and press [OK], then follow the indications
on the screen.
5 Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in grey on the display cannot be played
back by this unit.
Playing back contents on the
DLNA server
Using the Digital Media
Controller
Renderer
Server
Controller
Server
i
Controller
Renderer
DMP-UB900_EB-SQT1293.book 24 ページ ２０１６年３月７日 月曜日 午後３時３７分
To Next Page
Loading...
