Playing back video
TQBS0033
54
Press [;].
•Press [1a1.3] to restart play.
While paused, press [6] or [5].
•Press [1a1.3] to restart play.
• The speed increases up to 5 steps.
• MKV, MP4 and MPEG2: Slow-motion is not effective.
• [BD-V], AVCHD ([DVD-R]): Forward direction [5] only.
• Slow-motion cannot be used on encrypted programmes
().
While paused, press [2](2;) or [1](;1).
• Each press shows the next frame.
• Press and hold to change in succession forward
or backward.
•Press [1a1.3] to restart play.
• MKV, MP4 and MPEG2: Frame-by-frame is not effective.
• [BD-V], AVCHD ([DVD-R]): Forward direction [1](;1) only.
• Frame-by-frame cannot be used on encrypted programmes
().
Skip forward 1 minute:
Press [+60s].
Skip backward 10 seconds:
Press [-10s].
• Depending on the content that you play back, this function
is not available.
[BD-V] [DVD-V]
1 Press [OPTION].
2 Select “Playback Menu”, then press [OK].
3 Select “Top Menu”, “Pop-up Menu” or “Menu”,
then press [OK].
Press [:] or [9].
• [HDD] [USB_HDD] (For recorded programmes, > 27): It will
not skip the programme. But the programme in the grouped
programmes will be skipped. (> 49)
•[9] is not effective for encrypted programmes ( ).
Press [AUDIO].
• It will switch depending on the contents
recorded every time it is pressed.
[HDD] [USB_ HDD] (For recorded
programmes, > 27)
[BD-RE] [BD-R]
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “Basic Operation”, then press [OK].
4 Select “Audio Description”, then press [OK].
5 Select “Audio Description” and set to
“Automatic”.
6 Select “Volume”, then adjust the volume with
[2, 1].
• Depending on the usage conditions of this unit, this function
is not available.
• For details about the Audio Description, refer to “To listen to
the Audio Description” (> 32).
Pause
Slow-motion
Frame-by-frame
Manual Skip
To display menu
Skipping the content or chapter
Changing audio
Listening to the Audio Description
DMR-UBC&UBS90EG_eng.book 54 ページ ２０１８年５月２８日 月曜日 午後１２時５分
To Next Page
Loading...
