Panasonic DMR-UBS90 - 4 K TV and Audio Setup; 4 K TV Video and Audio Settings

Getting started
TQBS0033
14
You can enjoy richer sound by using the HDMI AUDIO OUT terminal.
(Audio is output in high resolution.)
Enjoying video and audio with a 4K-compatible TV
Setting
Set the following items in the setup menu (> 88):
• Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 97)
• Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 97)
Enjoying video with a 4K-compatible TV and audio with an amplifier
Setting
Set the following items in the setup menu (> 88):
• Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 97)
• Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 97)
• To enjoy audio with a TV
Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 97)
• The HDMI AUDIO OUT terminal is not compatible with 4K output and the VIERA Link (> 83).
HDMI
This unit’s rear panel
HDMI cable
(18 Gbps)
e.g., [UBC90]
HDMI INHDMI IN
HDMI cable
(18 Gbps)
e.g., [UBC90]
HDMI cable
Amplifier/receiver
DMR-UBC&UBS90EG_eng.book 14 ページ ２０１８年５月２８日 月曜日 午後１２時５分