EasyManua.ls Logo

Panasonic DP-UB150 - Quick Start Guide; STEP 1: Connecting to a TV

Panasonic DP-UB150
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
TQBS0381
Front
1
3 42
5
6
5
6
1 Disc tray
2 USB port ( DC 5 V 500 mA)
This port supports USB 2.0 High Speed.
3 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20° up and down, 30° left and
right
4 POWER LED
The LED lights up when the unit is turned on,
and ashes when error occurs.
5 Open or close the disc tray
6 Standby/on switch (
v
/
b
)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.
y
When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
y
If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
Quick Start Guide
STEP 1 : Connecting to a TV
HDMI IN
HDMI Cable
(18 Gbps)
y
To enjoy 4K output, you need to connect this unit to a 4K compatible TV.
y
To enjoy images in 4K/60p, you need an HDMI cable that supports 18 Gbps.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.
It is recommended that you use Panasonic’s HDMI cable.
y
If you connect this unit to a 4K-compatible TV and perform “Easy Setting”, 4K/60p will be
automatically selected.
y
To view Ultra HD Blu-ray content in 4K/HDR format, connect to the HDMI terminal of a device that
supports HDCP2.2, 4K/60p (4:4:4), and HDR signals that meet Ultra HD Blu-ray standards.
y
This unit consumes a small amount of AC power (
8) even when turned o󰀨 in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
y
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
To an AC outlet
AC adaptor
(supplied)

Related product manuals