Panasonic DP-UB820 - Control Reference Guide; Remote Control Functions

Getting started
- 8 -
Control reference guide
∫ Remote control
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 35)
∫ Reprogramming the remote
control
You can operate the TV using the unit’s remote
control.
1 Input the 2-digit code (> 44) while
pressing [Í] of TV operation button on the
remote control.
e.g., 01: [0] B [1]
2 Test by turning on the television.

≥ If your television brand has more than one code listed,
select the one that allows correct operation.
1
2
3
5
6
7
9
8
4
18
19
17
21
20
15
14
16
13
12
11
10
1 Turn the unit on and off
2 TV operation buttons
You can operate the TV through the unit’s
remote control. Some buttons may not work
depending on the TV.
3 Select title numbers, etc./Enter numbers or
characters
4 Cancel
Clear the currently selected character.
(when entering a password for “Ratings” in
the Setup menu, for example)
5 Basic playback control buttons (> 19)
6 Show Pop-up menu (> 20)
7 Show Top menu (> 20)
8 Show Option menu (> 26)
9 Colored buttons (red, green, yellow, blue)
Used for various purposes depending on the
screen
10 Transmit the remote control signal
11 Open or close the disc tray (> 9)
12 Show Closed Caption setup screen (> 26)
13 Change soundtrack (> 20)
14 Show the status messages (> 20)
15 Show “Playback Information Window” (> 20)
16 Show the Home screen of the Network
Service (> 22)
17 Show “HDR Setting” (> 20)
18 Show NETFLIX screen (> 22)
19 Show HOME menu (> 19)
20 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(2;)(;1) : Frame-by-frame (> 20)
21 Return to previous screen