Panasonic DVD-LX97 - On-Screen Menu Navigation; Picture and Audio Menu Settings

24
RQT8241
Using On-Screen Menus
Main menus
Other Settings
Play Menu (Only when the elapsed play time can be displayed,
[JPEG] [SD[PICTURE] : The Repeat and Marker functions can be used.)
Picture Menu
1 Press [ 34 ] to select the menu.
2 Press [ 1 ] to go to the next menu and [ 34 ] to set.
Repeat step 2 if necessary.
≥ Items shown differ depending on the type of software.
≥ Press [ 2 ] to go to the previous menu.
≥ There are items which you can select using the numbered buttons
and [ENTER] on the remote control.
≥ If the setting does not change, press [ENTER].
≥ To exit the screen: Press [RETURN].
Program, Group, Title
Chapter, Track, Playlist, Content
To start from a specific item
≥ Press [34] to select and press [ENTER].
≥ Press and hold [34] to alter faster.
Time
To skip incrementally or decrementally (Time Slip for play only) (Except i R/ i RW)
1. Press [ENTER] twice to show Time Slip indicator.
2. Press [3 4] to select the time and press [ENTER].
≥ Press and hold [34] to alter faster.
To start from a specific time (Time Search)
(Except i R/ i RW)
To change remaining/elapsed time display
Video
To display pixel number
[DivX] fps (frame per second) is also displayed.
Audio
(➜ page 16, Changing soundtracks)
To display the current bitrate or sampling frequency
Still Picture
To switch still picture
Thumbnail
To show thumbnail images
Subtitle
(➜ page 16, Changing subtitles)
Marker (VR)
To recall a marker recorded on DVD recorders
Angle
(➜ page 16, Angle select)
Rotate Picture
(➜ page 16, Still picture rotation)
Slideshow
To turn on/off slideshow
To change the slideshow timing (“1 Fast” to “5 Slow”)
≥ When using Slideshow, Skip/Rotate picture may not work correctly depending on the play position.
Other Settings
(➜ See below)
Play Speed
(➜ page 15, Changing play speed)
Repeat
(➜ page 14, Repeat play)
A-B Repeat
(➜ page 14)
Marker
Except [DVD-VR]
To mark up to 5 positions to play again
[ENTER] (The unit is now ready to accept markers.)
To mark a position: [ENTER] (at the desired point)
To mark another position: [21] to select “¢”➜ [ENTER]
To recall a marker: [21] ➜ [ENTER]
To erase a marker: [21]➜ [CANCEL] (Remote control)
≥ This feature doesn’t work during program and random play.
≥ Markers you add clear when you open the disc lid, remove the card,
press [AV SELECT] or switch the unit to standby.
Advanced Disc Review
(➜ page 15)
Picture Mode
(➜ page 19, Cinema1/Cinema2/Depth Enhancer/MPEG DNR)
Source
Select
[DivX]
When you select “ Auto ” the constructing method of the DivX contents is automatically
distinguished and output. If the picture is distorted, select “
I (Interlace) ” or “ P (Progressive) ”
depending on which constructing method was used when the contents were recorded to disc.
Auto I (Interlace) P (Progressive)
DISPLAY
1
Press once.
ENTER
2
Using On-Screen Menus
P2‑39e.fmPage24Thursday,February23,200612:11PM