Panasonic DVD-LX97

35
RQT8241
(Continued on the next page)
The on-screen menu shows
“2” as a soundtrack option
when [AUDIO] is pressed,
but the audio does not
change.
[DVD-A]
≥ Even if a second soundtrack isn’t recorded, two numbers will
normally be shown.
Play restarts from the
beginning of the track
when soundtrack is
changed. [DVD-A]
≥ This is normal on DVD-Audio.
Subtitle position is wrong.
≥ Adjust the position. (“Subtitle Position” in Display Menu) (25)
No subtitles. ≥ Display the subtitles. (16)
In A-B repeat, point B is
automatically set.
≥ The end of an item becomes point B when it is reached.
Play doesn’t start. ≥ This unit may not play WMA and MPEG4 that contains still picture data.
≥ If playing DivX VOD content, refer to the homepage where you
purchased the DivX VOD content. (Example: www.divx.com/vod)
≥ If a disc contains CD-DA and other formats, proper playback may not be possible.
No picture on the LCD. ≥ Select a monitor mode other than “OFF” (No picture). (14, Selecting
how to show 4:3 aspect pictures on the LCD).
The LCD is dark. ≥ Adjust the brightness. (14)
LCD pixels turn black or
radiate different colors.
≥ The LCD is constructed with precision technology so 99.99 % of the pixels
are active, but of the remaining of 0.01 %, there are pixels that may be black
or emit light constantly. This phenomenon is not a malfunction.
Picture doesn’t appear on
the television (or the size
of the picture seems
wrong).
≥ Check connections. (31)
≥ Check that the television is on.
≥ Check that the input mode on the television is correct.
≥ Check the settings in “Video—TV Aspect”. (26)
≥ Turn off the zooming feature on your television if you are using Zoom. (25)
≥ Ensure that the unit is connected directly to the television, and is not
connected through a video cassette recorder. (31)
Picture distorted.
≥ Picture quality may worsen or some frames may be skipped when
viewing [MPEG4] or [SD[VIDEO], but this is normal.
≥ [DivX] Change “Source Select” in Picture Menu. (24)
≥ Set “Monitor Priority” to “Video Output” when connecting to a television. (26)
Picture stops. ≥ Picture may stop if the DivX files are greater than 2 GB.
Menu not displayed
correctly.
≥ Restore the zoom ratio to a1.00. (25)
≥ Set “Subtitle Position” in Display Menu to “0”. (25)
Auto zoom function does
not work well.
≥ Use the other preset aspect ratios or manual adjustment. (25)
≥ Zoom function may not work well, especially in dark scenes and may
not work depending on the type of disc or card.
No sound from the unit’s
speakers.
≥ The speaker is off if the LCD is closed or headphones are connected.
≥ Turn up the volume. (10, 12)
Sound distorted. ≥ Select “Off” in “Advanced Surround”. (15)
≥ Move unit away from mobile phones.
≥ Noise may occur when playing WMA or MPEG4 files.
≥ The disc may have restrictions on the method of audio output. With
some multi-channel discs, audio will not be output properly. Refer to
the disc’s jacket for more information. [DVD-A]
Piercing noise comes
from the speakers.
≥ If you have connected a digital amplifier which does not include
decoder, be sure to select “PCM” in “Dolby Digital”, “DTS Digital
Surround” or “MPEG” in “Audio” tab. (27)
Specific operation impossible or incorrect
Picture incorrect
Sound incorrect
Troubleshooting guide
P2‑39e.fmPage35Thursday,February23,200612:11PM