To Next Page
M
Michael BellJul 30, 2025
What to do for improper reset operation of Panasonic Telephone System?
- SShannon GarciaJul 30, 2025
Press the Reset Button.
What to do for improper reset operation of Panasonic Telephone System?
Press the Reset Button.
How to fix Panasonic EASA-PHONE KX-T123210 speed dialing?
If speed dialing or one-touch dialing is not working on your Panasonic Telephone System, it might be due to incorrect programming. Ensure that you have entered the line access code (9) or trunk group access code (81 through 88) into the programming settings.
What to do if Panasonic EASA-PHONE KX-T123210 extension does not operate?
If an extension on your Panasonic Telephone System isn't working, consider these potential solutions: * If the telephone does not work, replace the phone. * Check the connection between the system and the extension. If the telephone does not work, the connection between the system and the extension must be repaired. Use a 2 wires cord. * If you're using a telephone with an A-Al relay, set the A-Al relay switch to the “OUT” or “OFF” position. * A bad printed circuit board (LC-Card) can cause this problem. Exchange the printed circuit board for another one.
Why is there noise in external paging on my Panasonic Telephone System?
If you're experiencing noise in external paging with your Panasonic Telephone System, the issue might be induced noise on the wire between the System and the Amplifier. Using a shielded cable as the connection wire between the System and Amplifier is recommended. A short shielded cable is also recommended.
General| Brand | Panasonic |
|---|---|
| Model | EASA-PHONE KX-T123210 |
| Category | Telephone System |
| Language | English |
Entry of the current day, date, and time for system operation.
Stores system phone numbers for quick access and dialing.
Assigns unique 3-digit extension numbers to each phone jack.
Configures automatic extension searching when the dialed extension is busy.
Procedure for properly connecting the unit frame to earth ground.
Instructions for securely mounting the unit on a wall or concrete surface.
Guide for connecting the first six Central Office lines to the system.
Instructions for connecting proprietary and standard telephones to jacks 1-16.
Procedure to set the current date and time for system operation.
Programming system phone numbers for quick dialing.
Assigns 3-digit extension numbers to specific extension jacks.
Assigns extensions to function as system operators.
Instructions for initiating calls using the proprietary telephone.
Features available when a line or extension is busy.
Procedures for answering incoming calls on the system.
Functions available during an active call.
Instructions for broadcasting audio messages to extensions or groups.
Various additional system features and their usage.
Guidelines and cautions for installing the telephone system unit.
Precautions and guidelines for connecting cables and wiring.
Programming system features for one-touch dialing access.
Configures automatic CO line selection for outgoing calls.
Sets automatic answering preferences for incoming calls.
Allows reprogramming CO buttons for different functions.
