Panasonic EBL512 G3 User Manual

EBL512 G3
V. 3.0.X
Fire alarm solutions
5000S Series
OPERATING
INSTRUCTONS
www.panasonic-re-security.com

Panasonic EBL512 G3 Specifications

General

Brand	Panasonic
Model	EBL512 G3
Category	Smoke Alarm
Language	English

Summary

6. User Data Management

7. System Access and Navigation

8. User Levels According to EN54-2

8.1. User Level Definitions

12. Disable or Re-enable Alarm Devices

13. Silence Buzzer Operation

19. Alarm Reset Procedures

20. Fault Conditions Overview

21. Fault Messages Reference

22. Fault Acknowledge Procedure

23. System Commissioning

23.1. Single Control Unit Commissioning

Steps for commissioning a single control unit, including cable connections and power supply.

23.2. Control Units in a Network

Instructions for setting up networks, including 5040 and TLON network configurations.

25. System Restart Procedures

27. Perform Monthly Test (H1)

28. Disable or Re-enable Functions (H2)

28.1. Zone or Zone/Address Disable/Re-enable (H2/B1)

28.2. Output Disable or Re-enable (H2/B2)

31. Service Functions (H5)

31.1. Calibration of Supervised Outputs (H5/A1)

Procedure to calibrate supervised outputs to ensure correct operational range.

32. Fault Acknowledge Procedure (H6)

33. Perform Zone Test (Test Mode) (H7)

34. Maintenance Operations (H8)

34.1. Dis-/Re-connect Loop/Zone Line Input (H8/S1)

Procedure for safely disconnecting and reconnecting loops or lines to prevent damage.

34.5. Safe Shut Down of Control Unit (H8/S5)

Procedure for safely shutting down the control unit to save data before powering off.

36. Change Password (H10)

39. Battery Maintenance Procedures

40. How to Avoid Nuisance Fire Alarms