13
English
Cleaning
Clean the straightener after it has cooled and with the plug
removed from the household outlet.
Cleaning the nanoe™ outlet
● Clean the nanoe™ Outlet about once per month.
● This maintenance allows the straightener to sustain the
generated level of nanoe™ over a long period.
1
1
Shut the Iron Plate with
the Open/Close Lock.
2
2
Insert the “cleaning
brush” into the base,
towards the metal
section (a) in the
nanoe
TM
Outlet.
(a)
3
3
Rub the metal section
back and forth with the
brush 10 times.
(nanoe
TM
Outlets are
located on both sides.)
(On both sides)
Cleaning the straightener
● When this unit has become dirty or styling products, etc.
have gotten onto it, please soak a rag in soapy water, wring
it out, and wipe the unit clean.
● Do not use alcohol, polish remover, or detergent (liquid hand
soap, etc.).
Doing so may crack or discolor the surface of the
straightener.
EH-HS99_ASIA.indb 13EH-HS99_ASIA.indb 13 21/8/2561 9:36:0221/8/2561 9:36:02
To Next Page
